Richard Casto
05-27-2009, 07:22 AM
I am looking to do a 911 parking brake conversion for my 914. It is my understanding that the parking brake backing plate (901.352.081.14) and related assembly is the correct match for the 914 arm. I believe (not 100% sure) that this is found on a 70-73 911. The assembly for the later aluminum arms doesn't fit without modifications, so I am looking for the pre aluminum arms, but not the very early pre 69/70 assembly.
I need a left and right set of the complete hardware that bolts to the arm. This would be the bearing retainer, backing plate, bowtie spreader, adjuster, pins, springs, etc. If you could include some old worn shoes would also be great, but is not required. I do not need the cable and lever.
Please PM me photos (if you have any), price and shipping to 27713.
Thanks!
Richard
I need a left and right set of the complete hardware that bolts to the arm. This would be the bearing retainer, backing plate, bowtie spreader, adjuster, pins, springs, etc. If you could include some old worn shoes would also be great, but is not required. I do not need the cable and lever.
Please PM me photos (if you have any), price and shipping to 27713.
Thanks!
Richard